Search
Close this search box.

Metal Stamping Dies

Ceeto Enterprise Development Limited. as a professional deep drawing metal stamping dies manufacturer with over thirty years experience. metal stamping die and parts made of steel, aluminum , stainless steel , copper . We offer a comprehensive knowledge in the sector of sheet metal forming technology primarily direct to the two industries:

Metal Deep Drawing Tooling manufactured in order to form a metalworking process which uses tensile forces to stretch metal sheet. It is broken up into two types: sheet metal drawing and wire, bar, and tube drawing. The specific definition for sheet metal drawing is that it involves plastic deformation over a curved axis. For wire, bar, and tube drawing the starting stock is drawn through a die to reduce its diameter and increase its length. Stainless steel deep drawing is usually done at room temperature, thus classified a cold working process, however it may be performed at elevated temperatures to hot work large wires, rods or hollow sections in order to reduce forces. Sheet metal drawing becomes deep drawing when the workpiece is drawing longer than its diameter. It is common that the workpiece is also processed using other forming processes, such as piercing, ironing, necking, rolling, and beading. The success of forming is in relation to two things, the flow and stretch of stainless steel sheet material.

As a deep drawing die forms a shape from a flat sheet of metal, there is a need for the material to move into the shape of metal stamping die. The flow of material is controlled through pressure applied to the blank and lubrication applied to the die or the blank. If the form moves too easily, wrinkles will occur in the part. To correct this, more pressure or less lubrication is applied to the blank to limit the flow of material and cause the material to stretch or thin. If too much pressure is applied, the part will become too thin and break accordingly. Deep Drawing metal is the science of finding the correct balance between wrinkles and breaking to achieve a successful part.

Progressive stamping Tooling Machined is a metalworking method that can encompass punching, coining, bending and several other ways of modifying metal raw material, combined with an automatic feeding system. The feeding system pushes a strip of metal (as it unrolls from a coil) through all of the stations of a progressive stamping die. Each station performs one or more operations until a finished part is made. The final station is a cutoff operation, which separates the finished part from the carrying web. The carrying web, along with metal that is punched away in previous operations, is treated as scrap metal. The progressive stamping die is placed into a reciprocating stamping press. As the press moves up, the top die moves with it, which al-lows the material to feed, When the press moves down, the die closes and performs the stamping operation. With each stroke of the press, a completed part is removed from the die. Since additional work is done in each “station”of the die, it is important that the strip be advanced very precisely so that it aligns within a few thousandths of an inch as it moves from station to station. Bullet shaped or conical “pilots” enter previously pierced round holes in the strip to assure this alignment since the feeding mechanism usually cannot provide the necessary precision in feed length. The Progress stamping dies are usually made of tool steel to withstand the high shock loading involved, retain the necessary sharp cutting edge, and resist the abrasive forces involved.

Contact Us Now

Send us a message if you have any questions or request a quote.